OUR PRODUCTS

SUMMER COMFORT

Values given according to the standards EN 410 & EN 673 – 2011
PRODUCT Color in Reflection LT (%) Solar Factor g-value Shading coefficient SC Selectivity LT / g External Light Reflectance LRe (%) U-Value (EN 673) (W/m2.K) Possible use as single glazing (coating on surface #) Coating position on DGU Processing Benefits
To be tempered / Annealed coating (if available) Temperable Lamination (coating #2 inside the laminate) Bending Screenprinting & To be tempered / Annealed coating (if available) enamelling
Solar control Glass COOL-LITE ST for double glazing (6+16+4mm PLANITHERM XN on face #3) on PLANICLEAR Properties:
Solar control coated glass that can be toughened

Advantages:
- Can be curved
- Can be enameled
- Can be silk-screen printed
COOL-LITE ST BRIGHT SILVER / DIAMANT® Silver 61 0,5 0,57 1,22 32 1,1 #2 #2 Yes Yes*1 Yes*3 Yes*4
COOL-LITE ST 167 Neutral 61 0,49 0,56 1,24 21 1,1 #2 #2 Yes Yes*1 Yes*3 Yes*4
COOL-LITE ST 150 Neutral 46 0,38 0,44 1,21 19 1,1 #2 #2 Yes Yes*1 Yes*3 Yes*4
COOL-LITE ST 136 Grey 34 0,28 0,32 1,21 23 1,1 #2 #2 Yes Yes*1 Yes*4
COOL-LITE STB 136 Blue 33 0,28 0,32 1,18 19 1,1 #2 #2 Yes Yes*1 Yes*4
COOL-LITE ST 120 Silver 18 0,16 0,18 1,13 32 1,1 #2 #2 Yes Yes*1 Yes*4
COOL-LITE STB 120 Blue 20 0,18 0,21 1,11 21 1,1 #2 #2 Yes Yes*1 Yes*4
COOL-LITE ST 108 Silver 8 0,08 0,09 1,00 44 1,1 #2 #2 Yes
Solar control Glass ANTELIO for double glazing (6+16+4mm PLANITHERM XN on face #3) on PLANICLEAR Properties:
Solar control coated glass

Advantages:
- High light transmission
- Energy saving and economical use of air conditioning
- Large architectural creation options: curved, enameled or silk-screen printed
- Uniform esthetics of facades
ANTELIO CLEAR Neutral 42 0,39 0,45 1,08 28 1,1 #1 or #2 #2 Yes Yes*3
ANTELIO SILVER Silver 61 0,5 0,57 1,22 32 1,1 #1 or #2 #2 Yes Yes*3

*1)Solar control coating in contact with PVB modifies performances and aesthetics. Please contact us to get the approved PVB list.
*2)This coating can be laminated for use on a facade up to 1500m2 and project must be made from a single production batch from SGG.
*3)Bending results depend on the process; trials should be done for validation.
*5)Screen-printing, roller coating, spray and digital printing validation required.
*6)Project must be made from a single production batch from SGG.