OUR PRODUCTS

WINTER COMFORT

Values given according to the standards EN 410 & EN 673 – 2011
PRODUCT Color in Reflection LT (%) Solar Factor g-value Shading coefficient SC Selectivity LT / g External Light Reflectance LRe (%) U-Value (EN 673) (W/m2.K) Possible use as single glazing (coating on surface #) Coating position on DGU Processing Benefits
To be tempered / Annealed coating (if available) Temperable Lamination (coating #2 inside the laminate) Bending Screenprinting & To be tempered / Annealed coating (if available) enamelling
Low-E glass for double glazing (6+16+4mm) on PLANICLEAR*6 Properties:
High performance low-emissivity glass

Advantages:
- Enhanced thermal insulation
- Multifunctional glazing when assembled in DGU (security, safety, acoustic comfort, etc.)
- Important luminosity supply
- Environmental protection (CO2 emission decrease)
PLANITHERM XN Neutral 81 0,64 0,74 1,27 11 1,1 #3
PLANITHERM XN II Neutral 81 0,64 0,74 1,27 11 1,1 #3 To be tempered Yes*3
PLANITHERM ONE Neutral 71 0,51 0,59 1,39 22 1,0 #3
PLANITHERM ONE II Neutral 71 0,52 0,60 1,37 22 1,0 #3 To be tempered Yes*3
High Performance Low - E coating for double glazing (6+16+4mm) on PLANICLEAR Advantages:
- High thermal insulation while insuring natural light intake
- Significant environmental impact (up to - 20% of the energy bill)
- Transparency
ECLAZ Neutral 83 0,69 0,79 1,20 12 1,1 #3
ECLAZ II Neutral 83 0,69 0,79 1,20 11 1,1 #3 To be tempered
ECLAZ ONE Neutral 79 0,59 0,68 1,34 15 1,0 #3
ECLAZ ONE II Neutral 78 0,59 0,68 1,32 15 1,0 #3 To be tempered
High Performance Low - E coating for triple glazing units (4+14+4+14+4mm) on PLANICLEAR
ECLAZ Neutral 77 0,60 0,69 1,28 14 0,6 #3
ECLAZ II Neutral 77 0,60 0,69 1,28 14 0,6 #3 To be tempered
ECLAZ ONE Neutral 70 0,48 0,55 1,46 21 0,5 #3
ECLAZ ONE II Neutral 70 0,48 0,55 1,46 21 0,5 #3 To be tempered

*1)Solar control coating in contact with PVB modifies performances and aesthetics. Please contact us to get the approved PVB list.
*2)This coating can be laminated for use on a facade up to 1500m2 and project must be made from a single production batch from SGG.
*3)Bending results depend on the process; trials should be done for validation.
*5)Screen-printing, roller coating, spray and digital printing validation required.
*6)Project must be made from a single production batch from SGG.